Cleaning the family altar before Tet: when to do it, and how to clean wood, brass and porcelain
Quick answer: many Vietnamese families clean the ancestral altar around the 23rd day of the last lunar month (after the Kitchen Gods ceremony) or a few days before Tet; timing and rituals vary by family and region. For the cleaning itself: wipe wooden surfaces with a soft cloth wrung out well, polish brass with lemon and salt, wash porcelain cups, bowls and vases in diluted dishwashing liquid, and dry-wipe glass and photo frames. Avoid metal scourers and never leave water standing on wood.
Before you start
- Clean soft cloths (2–3: one damp, one dry) and a small soft brush for dust.
- A basin of warm water, dishwashing liquid, lemon, salt, baking soda.
- A cloth or board to set items on when you take them down.
- Many families light incense and ask permission before cleaning; follow your own family’s custom.
Work in this order so dust doesn’t settle again
- Take the items down group by group and set them on the cloth. Snap a photo first so you remember where everything goes.
- Dust from top to bottom: ceiling, the wall behind, frames, then the table top.
- Wipe the altar table and let it dry.
- Clean each group of items: porcelain, brass, glass (see below).
- Dry everything before putting it back in place.
Wooden altar: damp, never wet
- Remove dust with a dry cloth or soft brush first, especially in carved areas.
- Then wipe with a cloth dipped in warm water and wrung out thoroughly. For sticky marks or wax, add a few drops of dishwashing liquid to the water, wipe, then wipe again with a cloth dampened in clean water.
- Dry immediately. Lacquered or varnished wood can stain or blister if water sits on it.
- Candle wax: let it harden, then lift it gently with a plastic card, not a knife.
Brass (incense burners, candlesticks, cranes): lemon and salt
- Dip half a lemon in salt and rub tarnished spots, or mix lemon juice and baking soda into a paste and polish with a soft cloth.
- Rinse with clean water and dry straight away to avoid streaks.
- Lacquered, plated or inlaid pieces: only wipe with a damp cloth; lemon and salt can strip the coating. If unsure, test on the base first.
- No metal scourers or sandpaper.
Porcelain cups, bowls and vases
- Soak in warm water with dishwashing liquid, wash with a soft sponge, rinse well and air-dry upside down.
- Vases with slimy residue at the bottom: add warm water and a spoonful of baking soda, shake, then wash; white limescale responds to a 15–20 minute soak in diluted vinegar.
- Tea-stained cups: see Tea and coffee stains on cups and teapots.
Everyday dishwashing liquid such as SPY Dishwashing Liquid, diluted, is enough for porcelain on the altar.
Glass, frames and mirrors
- Dust with a dry cloth, then spray glass cleaner onto the cloth (not directly onto photos or wooden frames) and wipe, for example Eddy Glass Cleaner.
- Prints without glass: brush off dust with a soft brush only.
What to avoid
- Spraying cleaners directly onto carved wood, photos or lacquered and gilded pieces.
- Soaking wooden items in water.
- Mixing cleaning products.
- Lamps and sockets on the altar: unplug before wiping.
Keeping the altar clean through Tet
- Place a dish under the incense bowl to catch ash and empty it every few days.
- Replace wilted flowers early and change vase water every 1–2 days.
- Put fruit on lined plates and check daily so juice doesn’t drip onto the wood.
Read more: Deep cleaning before Tet: a room-by-room checklist · Sharing Tet cleaning chores across the family · How to clean glass without streaks · Washing up after Tet feasts
Reviewed by: Vu Hoang Nam, Head of Marketing
← More home care guides